Allow Channels 12,13,14 based on country (*MOD*)
Moderator: Moderators
-
- Posts: 58
- Joined: Fri Jan 03, 2014 2:01 pm
Re: Allow Channels 12,13,14 based on country (*MOD*)
I don't care about "space efficiency", after all my router is full already by itself, but at this point I will just recompile.
-
- Posts: 58
- Joined: Fri Jan 03, 2014 2:01 pm
Re: Allow Channels 12,13,14 based on country (*MOD*)
By the way, the second post should be changed--it's not "make menuconfig" but "make custom".
Re: Allow Channels 12,13,14 based on country (*MOD*)
tapper wrote:iliya wrote:hi all.
I've flashed my TL-WR842ND with the 1.7.1 stable version, and since the it's working perfectly. Now I've got a TL-WR841ND v8.2 and I would like to flash it and use it as a bridge of my 842 on channel 12,13,14. I live in Europe where we can use those channels and they significantly boost quality of signal and speed of wifi.
Reghack working good on 842, but i received "no space left on drive" on 841ND router when trying to patch it.
If anyone has such a modified firmware for 841N/ND v8.2 i'd appreciate it.
p.s: i'm too thick to do it by myself
Hi I don't no if it works good with 1.7.1 but here gos!
load up the Gargoyle Router Management Utility, click System, click Plugins, then click on the Refresh Plugins butten and then install the Webshell Plugin.
Wen the Webshell Plugin is installed it will show up in the menu open it up and copy and paste this line by line.
After each line click Execute. wget and the link should be on same line.
cd /tmp/
wget http://luci.subsignal.org/~jow/reghack/reghack.mips.elf
chmod +x reghack.mips.elf
./reghack.mips.elf /lib/modules/*/ath.ko
./reghack.mips.elf /lib/modules/*/cfg80211.ko
reboot
Good luck!
Yeah!!!! It works well with my router WD Mynet N750
My Net WD750
Re: Allow Channels 12,13,14 based on country (*MOD*)
Does this still work on latest gargoyle or latest ispysail builds? (I think i grt some errors or warnings when i run it, dont remember which one)
wdr3600 v1.5 @ Latest ispyisail build
Re: Allow Channels 12,13,14 based on country (*MOD*)
No. It is no longer necessary either. You can set your country on the command line
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Allow Channels 12,13,14 based on country (*MOD*)
Dear Lantis
I don't know, if I understand, please correct me, if I am wrong. After upgrading to 1.9.1 firmware, there is possibility to choose channel 13 without need of using:Lantis wrote:No. It is no longer necessary either. You can set your country on the command line
Sincerelycd /tmp/
wget http://luci.subsignal.org/~jow/reghack/reghack.mips.elf
chmod +x reghack.mips.elf
./reghack.mips.elf /lib/modules/*/ath.ko
./reghack.mips.elf /lib/modules/*/cfg80211.ko
reboot
VAMET
Re: Allow Channels 12,13,14 based on country (*MOD*)
You cannot enable channel 13 globally, but you can tell the router which country you are in, and the router will enable the channels that are allowed there.
One manual for this I've got in my bookmarks, 'cause I've got to do it every time I update one of my routers:
https://feeding.cloud.geek.nz/posts/set ... x-openwrt/
Basically, you've got to ssh into your router and issue a couple UCI commands.
Please take care not to use channels that are illegal at your location!
Regards
Ektus.
One manual for this I've got in my bookmarks, 'cause I've got to do it every time I update one of my routers:
https://feeding.cloud.geek.nz/posts/set ... x-openwrt/
Basically, you've got to ssh into your router and issue a couple UCI commands.
Please take care not to use channels that are illegal at your location!
Regards
Ektus.
Re: Allow Channels 12,13,14 based on country (*MOD*)
Dear ektus
Thank you for your information. In Poland channel 13 is allowed without any problems. I have got this channel enabled in stock firmware too.
Sincerely
Thank you for your information. In Poland channel 13 is allowed without any problems. I have got this channel enabled in stock firmware too.
Sincerely
VAMET
Re: Allow Channels 12,13,14 based on country (*MOD*)
how to open 12-13 channels for firmware Version 1.10.0 help pzhlst
Re: Allow Channels 12,13,14 based on country (*MOD*)
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.