Even if I don't use Extroot when the the usb key is connected in
Connection -> Basic -> Internet / WAN -> Connect Via
I lost the Static IP (Wireless) option until I unplugged the flash drive and reboot-stop the router. Like there is a loss of power.
Is it possible to confirm me, Connection -> Ping Watchdog (Version: 20131030)
is not working properly ?
When he's activated gargoyle is really really ... slow.
Thx
Version 1.11.0 : Based on OpenWrt 18.06
Moderator: Moderators
Re: Version 1.11.0 : Based on OpenWrt 18.06
What router model?skaox wrote:Even if I don't use Extroot when the the usb key is connected in
Connection -> Basic -> Internet / WAN -> Connect Via
I lost the Static IP (Wireless) option until I unplugged the flash drive and reboot-stop the router. Like there is a loss of power.
Is it possible to confirm me, Connection -> Ping Watchdog (Version: 20131030)
is not working properly ?
When he's activated gargoyle is really really ... slow.
Thx
How much RAM and Flash size?
We know older routers are unstable with 1.11.0
Re: Version 1.11.0 : Based on OpenWrt 18.06
1. Turn off the routerskaox wrote:Even if I don't use Extroot when the the usb key is connected in
Connection -> Basic -> Internet / WAN -> Connect Via
I lost the Static IP (Wireless) option until I unplugged the flash drive and reboot-stop the router. Like there is a loss of power
2. Disconnect the USB key
3. Turn on the router
4. Reset to default settings
5. After the router is powered up, plug in the USB key and format.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: Version 1.11.0 : Based on OpenWrt 18.06
@ispyisail
https://wikidevi.com/wiki/TP-LINK_TL-WR1043ND_v1.x
I tried 1.11.0, 1.11.x (23-06-19), 1.11.x (06-07-19) and they have the same problem after few reboot-shutdown or when extRoot is activated no more wireless (log from serial) :
ath9k ath9k: failed to initialize device
ath9k: probe of ath9k failed with error -12
I'm back to 1.10 without problem and nothing to report ;-!
https://wikidevi.com/wiki/TP-LINK_TL-WR1043ND_v1.x
I tried 1.11.0, 1.11.x (23-06-19), 1.11.x (06-07-19) and they have the same problem after few reboot-shutdown or when extRoot is activated no more wireless (log from serial) :
ath9k ath9k: failed to initialize device
ath9k: probe of ath9k failed with error -12
I'm back to 1.10 without problem and nothing to report ;-!
Re: Version 1.11.0 : Based on OpenWrt 18.06
@skaox
That router is known to have problems with 1.11.x (and other older routers)
end of life i'm afraid
That router is known to have problems with 1.11.x (and other older routers)
end of life i'm afraid
Re: Version 1.11.0 : Based on OpenWrt 18.06
I'll do my best to test and fix the extroot process at some point in the future.
BUT... I really struggle to do that, as I only own routers that have sufficient space.
BUT... I really struggle to do that, as I only own routers that have sufficient space.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.11.0 : Based on OpenWrt 18.06
@Lantis, my apologies if I was not clear.
Problem is not extroot just when it's activated wireless is automatically killed but even without that after a few reboot or shutdown error ath9k (wireless driver) ?!
Sometimes kernel panic or tainted, error swap, etc.. Sorry I didn't save the logs.
I have 60 % used in ssh with dh or in System->Plugins after installing (when it was possible) ping-watchdog, spectrum-analyser, nano, ncdu and htop. QoS and quota same package-thing ? Don't need QoS either. I'll try openwrt to see if I've the same problem ;
EndOfLife... THANK YOU.
Problem is not extroot just when it's activated wireless is automatically killed but even without that after a few reboot or shutdown error ath9k (wireless driver) ?!
Sometimes kernel panic or tainted, error swap, etc.. Sorry I didn't save the logs.
I have 60 % used in ssh with dh or in System->Plugins after installing (when it was possible) ping-watchdog, spectrum-analyser, nano, ncdu and htop. QoS and quota same package-thing ? Don't need QoS either. I'll try openwrt to see if I've the same problem ;
EndOfLife... THANK YOU.
Re: Version 1.11.0 : Based on OpenWrt 18.06
Does it have support for Archer C7 hardware acceleration?
Re: Version 1.11.0 : Based on OpenWrt 18.06
No, no third party firmware does at this stage.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.11.0 : Based on OpenWrt 18.06
I tried enabling Tor Server, but %VSZ exceeded 100% after a few hours. Is there a way to disable the Tor Directory service, which was added after v1.9, if I remember correctly?