Hey, guys,
I upgraded my TL-WR1043NDv1 from 1.10.x Final to 1.12.x Final, everything ran smoothly until I install the Adblock plugin.
The Plugins tab shows that it is installed but does not appear in Connection or Firewall (I don't remember where it configures the service). I installed the logread and webshell plugins, which I normally use and both work normally.
I appreciate any help. Thanks.
Adblock plugin installed but it doesn't appear
Moderator: Moderators
Adblock plugin installed but it doesn't appear
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)
Re: Adblock plugin installed but it doesn't appear
From memory those routers are running out of capacity.
RAM / Flash / CPU
Add block installs fine on my C7
also i'm not sure how effective the adblock is these days?
RAM / Flash / CPU
Add block installs fine on my C7
also i'm not sure how effective the adblock is these days?
Re: Adblock plugin installed but it doesn't appear
Try reinstalling it.
You can also try manually visiting http://192.168.1.1/ablock.sh
If that works, it just means the script to add it to the menu didn't run properly
You can also try manually visiting http://192.168.1.1/ablock.sh
If that works, it just means the script to add it to the menu didn't run properly
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Adblock plugin installed but it doesn't appear
I don't believe it is a problem of space or memory, when a plugin cannot be installed a warning appears "Package Cannot Be Installed (Insufficient Disk Space)".
I tried to access the direct link but it redirects to the home page. So I uninstalled and when I tried to install again the following appeared in the log:Lantis wrote: ↑Wed Sep 02, 2020 5:45 pmTry reinstalling it.
You can also try manually visiting http://192.168.1.1/ablock.sh
If that works, it just means the script to add it to the menu didn't run properly
Code: Select all
Wed Sep 2 20:38:15 2020 kern.info kernel: [22093.504343] do_page_fault(): sending SIGSEGV to gpkg for invalid read access from 00000000
Wed Sep 2 20:38:15 2020 kern.info kernel: [22093.512789] epc = 77448519 in libericstools.so.1[77446000+14000]
Wed Sep 2 20:38:15 2020 kern.info kernel: [22093.518895] ra = 774485d3 in libericstools.so.1[77446000+14000]
Wed Sep 2 20:38:15 2020 daemon.err uhttpd[1582]: WARNING: opkg file "/var/opkg-lists/openwrt_18.06-SNAPSHOT_telephony" does not exist or can not be opened
Wed Sep 2 20:38:15 2020 daemon.err uhttpd[1582]: No packages to install.
Wed Sep 2 20:38:15 2020 daemon.err uhttpd[1582]:
Wed Sep 2 20:38:15 2020 daemon.err uhttpd[1582]: Segmentation fault
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)
Re: Adblock plugin installed but it doesn't appear
That looks like an out of memory (RAM, not flash) type situation.
You can try minimising the number of lists it loads by commenting out (#) the openwrt related lines in /etc/opkg.conf
e.g. from
to
NOTE: Don't just copy mine as it will be for a different device and different version
You should then reboot to clear out RAM.
If that doesn't work can you provide a more complete log please? What you gave was good, but a bit more context before/after the error often helps as well. 50-100 lines either side is usually ok.
You can try minimising the number of lists it loads by commenting out (#) the openwrt related lines in /etc/opkg.conf
e.g. from
Code: Select all
src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base
src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages
src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing
src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony
src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific
dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
Code: Select all
#src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base
#src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages
#src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing
#src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony
src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific
dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
You should then reboot to clear out RAM.
If that doesn't work can you provide a more complete log please? What you gave was good, but a bit more context before/after the error often helps as well. 50-100 lines either side is usually ok.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Adblock plugin installed but it doesn't appear
you could also try SWAP
https://www.gargoyle-router.com/wiki/do ... sb_storage
The router is really at end of life
https://www.gargoyle-router.com/wiki/do ... sb_storage
The router is really at end of life
Re: Adblock plugin installed but it doesn't appear
I commented out the lines and reboot, tried to install again and it worked!Lantis wrote: ↑Wed Sep 02, 2020 10:12 pmThat looks like an out of memory (RAM, not flash) type situation.
You can try minimising the number of lists it loads by commenting out (#) the openwrt related lines in /etc/opkg.conf
e.g. fromtoCode: Select all
src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific dest root / dest ram /tmp dest plugin_root /plugin_root lists_dir ext /var/opkg-lists option overlay_root /overlay
NOTE: Don't just copy mine as it will be for a different device and different versionCode: Select all
#src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base #src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages #src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing #src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific dest root / dest ram /tmp dest plugin_root /plugin_root lists_dir ext /var/opkg-lists option overlay_root /overlay
You should then reboot to clear out RAM.
If that doesn't work can you provide a more complete log please? What you gave was good, but a bit more context before/after the error often helps as well. 50-100 lines either side is usually ok.
Thank you very much, Lantis.
Here is the log right after the reboot, before I try to install:
Code: Select all
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.000000] Linux version 4.9.223 (user@svr18) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6907+1109-7e15e21766) ) #0 Tue May 12 10:45:57 2020
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] MyLoader: sysp=aaaaaaa2, boardp=a2b2aaaa, parts=aaaaaaaa
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] SoC: Atheros AR9132 rev 2
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Determined physical RAM map:
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Thu Sep 3 10:13:00 2020 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep 3 10:13:00 2020 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Zone ranges:
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Movable zone start for each node
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Early memory node ranges
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8047c7c4, node_mem_map 81000020
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs noinitrd
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Memory: 27288K/32768K available (3236K kernel code, 167K rwdata, 808K rodata, 324K init, 205K bss, 5480K reserved, 0K cma-reserved)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] NR_IRQS:51
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.007902] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.090609] pid_max: default: 32768 minimum: 301
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.095359] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.101963] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.112474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.122309] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.129113] NET: Registered protocol family 16
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.135396] MIPS: machine is TP-LINK TL-WR1043ND
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.444540] clocksource: Switched to clocksource MIPS
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.450949] NET: Registered protocol family 2
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.456485] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.463460] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.469866] TCP: Hash tables configured (established 1024 bind 1024)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.476366] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.482210] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.488789] NET: Registered protocol family 1
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 0.493172] PCI: CLS 0 bytes, default 32
Thu Sep 3 10:13:00 2020 kern.warn kernel: [ 0.498721] Crashlog allocated RAM at address 0x1f00000
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.505335] workingset: timestamp_bits=30 max_order=13 bucket_order=0
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.521161] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.527016] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.547544] io scheduler noop registered
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.551467] io scheduler deadline registered (default)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.557120] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.563980] console [ttyS0] disabled
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.587601] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.596308] console [ttyS0] enabled
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.603317] bootconsole [early0] disabled
Thu Sep 3 10:13:00 2020 kern.warn kernel: [ 0.615838] m25p80 spi0.0: found s25fl064k, expected m25p80
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.633582] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.638761] 5 tp-link partitions found on MTD device spi0.0
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.644362] Creating 5 MTD partitions on "spi0.0":
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.649229] 0x000000000000-0x000000020000 : "u-boot"
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.656713] 0x000000020000-0x00000017cf58 : "kernel"
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.664274] 0x00000017cf58-0x0000007f0000 : "rootfs"
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.671323] mtd: device 2 (rootfs) set to be root filesystem
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.677136] 1 squashfs-split partitions found on MTD device rootfs
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.683368] 0x000000700000-0x0000007f0000 : "rootfs_data"
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.691464] 0x0000007f0000-0x000000800000 : "art"
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.698807] 0x000000020000-0x0000007f0000 : "firmware"
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 0.707093] Realtek RTL8366RB ethernet switch driver version 0.2.4
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.824568] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 0.831318] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.075439] libphy: rtl8366rb: probed
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.079971] libphy: Fixed MDIO Bus: probed
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.426601] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.434984] NET: Registered protocol family 10
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.443751] NET: Registered protocol family 17
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.448373] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.461535] 8021q: 802.1Q VLAN Support v1.8
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.472554] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 1.481691] Freeing unused kernel memory: 324K
Thu Sep 3 10:13:00 2020 kern.warn kernel: [ 1.486202] This architecture does not have kernel memory protection.
Thu Sep 3 10:13:00 2020 user.info kernel: [ 2.449134] init: Console is alive
Thu Sep 3 10:13:00 2020 user.info kernel: [ 2.452803] init: - watchdog -
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 2.564551] random: fast init done
Thu Sep 3 10:13:00 2020 user.info kernel: [ 5.886539] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.148107] usbcore: registered new interface driver usbfs
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.153730] usbcore: registered new interface driver hub
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.159267] usbcore: registered new device driver usb
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.206826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 6.224826] SCSI subsystem initialized
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.235395] ehci-platform: EHCI generic platform driver
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.240777] ehci-platform ehci-platform: EHCI Host Controller
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.246634] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.254760] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.284595] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.292121] hub 1-0:1.0: USB hub found
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.296344] hub 1-0:1.0: 1 port detected
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.304470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.312908] ohci-platform: OHCI generic platform driver
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.336997] usbcore: registered new interface driver usb-storage
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 6.346855] usbcore: registered new interface driver uas
Thu Sep 3 10:13:00 2020 user.info kernel: [ 6.352877] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Sep 3 10:13:00 2020 user.info kernel: [ 6.370701] init: - preinit -
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 7.455479] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 7.455501] eth0: link up (1000Mbps/Full duplex)
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 7.504868] random: procd: uninitialized urandom read (4 bytes read)
Thu Sep 3 10:13:00 2020 user.info kernel: [ 10.868816] mount_root: loading kmods from internal overlay
Thu Sep 3 10:13:00 2020 user.info kernel: [ 11.003642] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Sep 3 10:13:00 2020 user.info kernel: [ 11.013683] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 11.813011] jffs2: notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Sep 3 10:13:00 2020 user.info kernel: [ 11.829162] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Sep 3 10:13:00 2020 user.info kernel: [ 11.841377] block: extroot: not configured
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 11.890714] jffs2: notice: (424) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Sep 3 10:13:00 2020 user.info kernel: [ 12.150503] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Sep 3 10:13:00 2020 user.info kernel: [ 12.162647] block: extroot: not configured
Thu Sep 3 10:13:00 2020 user.info kernel: [ 12.168159] mount_root: switching to jffs2 overlay
Thu Sep 3 10:13:00 2020 user.warn kernel: [ 12.312189] urandom-seed: Seeding with /etc/urandom.seed
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 12.467462] eth0: link down
Thu Sep 3 10:13:00 2020 user.info kernel: [ 12.484071] procd: - early -
Thu Sep 3 10:13:00 2020 user.info kernel: [ 12.488432] procd: - watchdog -
Thu Sep 3 10:13:00 2020 user.info kernel: [ 13.249054] procd: - watchdog -
Thu Sep 3 10:13:00 2020 user.info kernel: [ 13.252499] procd: - ubus -
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 13.696174] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 13.703663] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 13.796564] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Sep 3 10:13:00 2020 user.info kernel: [ 13.804723] procd: - init -
Thu Sep 3 10:13:00 2020 user.info kernel: [ 15.557301] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.717689] RPC: Registered named UNIX socket transport module.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.723649] RPC: Registered udp transport module.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.728450] RPC: Registered tcp transport module.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.733180] RPC: Registered tcp NFSv4.1 backchannel transport module.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.759398] tun: Universal TUN/TAP device driver, 1.6
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.764486] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.789752] gre: GRE over IPv4 demultiplexor driver
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.797779] ip_gre: GRE over IPv4 tunneling driver
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.887598] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 15.958199] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.057266] Netfilter messages via NETLINK v0.30.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.072963] ip_set: protocol 6
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.247198] u32 classifier
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.249935] input device check on
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.253613] Actions configured
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.284126] Mirror/redirect action on
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.382632] fuse init (API version 7.26)
Thu Sep 3 10:13:00 2020 kern.notice kernel: [ 16.418350] Bridge firewalling registered
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.448997] usbcore: registered new interface driver cdc_acm
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.454769] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.512499] usbcore: registered new interface driver cdc_wdm
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.536508] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.544612] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.610283] Ebtables v2.0 registered
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.619476] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.656265] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.801380] ctnetlink v0.93: registering with nfnetlink.
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 16.991281] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.058459] usbcore: registered new interface driver ums-alauda
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.069603] usbcore: registered new interface driver ums-cypress
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.080942] usbcore: registered new interface driver ums-datafab
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.091757] usbcore: registered new interface driver ums-freecom
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.102914] usbcore: registered new interface driver ums-isd200
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.114424] usbcore: registered new interface driver ums-jumpshot
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.125448] usbcore: registered new interface driver ums-karma
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.138156] usbcore: registered new interface driver ums-sddr09
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.149333] usbcore: registered new interface driver ums-sddr55
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.161291] usbcore: registered new interface driver ums-usbat
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.173782] usbcore: registered new interface driver usblp
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.211050] usbcore: registered new interface driver usbserial
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.217105] usbcore: registered new interface driver usbserial_generic
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.223787] usbserial: USB Serial support registered for generic
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.313102] xt_time: kernel timezone is -0000
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.323542] usbcore: registered new interface driver cdc_ether
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.338999] usbcore: registered new interface driver cdc_ncm
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.416934] usbcore: registered new interface driver huawei_cdc_ncm
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.522688] PPP generic driver version 2.4.2
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.531644] PPP MPPE Compression module registered
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.539769] NET: Registered protocol family 24
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.547103] PPTP driver version 0.8.5
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.557186] usbcore: registered new interface driver qmi_wwan
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.570119] usbcore: registered new interface driver rndis_host
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.582642] usbcore: registered new interface driver sierra
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.588474] usbserial: USB Serial support registered for Sierra USB modem
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.600643] usbcore: registered new interface driver sierra_net
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.706028] usbcore: registered new interface driver cdc_mbim
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.715845] usbcore: registered new interface driver option
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.721583] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.736927] usbcore: registered new interface driver qcserial
Thu Sep 3 10:13:00 2020 kern.info kernel: [ 17.742821] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Sep 3 10:13:00 2020 kern.debug kernel: [ 17.909930] ath: EEPROM regdomain: 0x0
Thu Sep 3 10:13:01 2020 kern.debug kernel: [ 17.909942] ath: EEPROM indicates default country code should be used
Thu Sep 3 10:13:01 2020 kern.debug kernel: [ 17.909947] ath: doing EEPROM country->regdmn map search
Thu Sep 3 10:13:01 2020 kern.debug kernel: [ 17.909963] ath: country maps to regdmn code: 0x3a
Thu Sep 3 10:13:01 2020 kern.debug kernel: [ 17.909970] ath: Country alpha2 being used: US
Thu Sep 3 10:13:01 2020 kern.debug kernel: [ 17.909976] ath: Regpair used: 0x3a
Thu Sep 3 10:13:01 2020 kern.debug kernel: [ 17.951630] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Sep 3 10:13:01 2020 kern.info kernel: [ 18.142988] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Thu Sep 3 10:13:01 2020 user.info kernel: [ 18.154055] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Sep 3 10:13:01 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Sep 3 10:13:01 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: started, version 2.80 cachesize 150
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: DNS service limited to local subnets
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain test
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain onion
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain localhost
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain local
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain invalid
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain bind
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain lan
Thu Sep 3 10:13:02 2020 daemon.warn dnsmasq[1120]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: read /etc/hosts - 5 addresses
Thu Sep 3 10:13:02 2020 daemon.info dnsmasq[1120]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Sep 3 10:13:03 2020 authpriv.info dropbear[1147]: Not backgrounding
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: tunnel
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: Network device
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: bridge
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: veth
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: macvlan
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: 8021ad
Thu Sep 3 10:13:09 2020 user.notice : Added device handler type: 8021q
Thu Sep 3 10:13:11 2020 daemon.err block: /dev/mtdblock2 is already mounted on /rom
Thu Sep 3 10:13:11 2020 daemon.err block: /dev/mtdblock3 is already mounted on /overlay
Thu Sep 3 10:13:15 2020 kern.debug kernel: [ 35.373277] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.373922] eth0: link up (1000Mbps/Full duplex)
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.378768] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.410984] br-lan: port 1(eth0.1) entered blocking state
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.416501] br-lan: port 1(eth0.1) entered disabled state
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.422438] device eth0.1 entered promiscuous mode
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.427321] device eth0 entered promiscuous mode
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.453961] br-lan: port 1(eth0.1) entered blocking state
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.459471] br-lan: port 1(eth0.1) entered forwarding state
Thu Sep 3 10:13:15 2020 kern.info kernel: [ 35.465279] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'lan' is enabled
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'lan' is setting up now
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'lan' is now up
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: reading /tmp/resolv.conf.auto
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain test
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain onion
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain localhost
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain local
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain invalid
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain bind
Thu Sep 3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain lan
Thu Sep 3 10:13:15 2020 daemon.warn dnsmasq[1120]: ignoring nameserver 192.168.2.1 - local interface
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' is enabled
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' is now up
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan' is enabled
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' is enabled
Thu Sep 3 10:13:15 2020 daemon.notice netifd: bridge 'br-lan' link is up
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Network device 'eth0' link is up
Thu Sep 3 10:13:15 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Network device 'lo' link is up
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Sep 3 10:13:15 2020 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan' is setting up now
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Sep 3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' is now up
Thu Sep 3 10:13:16 2020 kern.info kernel: [ 36.404705] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Sep 3 10:13:16 2020 kern.info kernel: [ 36.411709] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Sep 3 10:13:17 2020 daemon.err insmod: module is already loaded - slhc
Thu Sep 3 10:13:17 2020 daemon.err insmod: module is already loaded - ppp_generic
Thu Sep 3 10:13:17 2020 daemon.err insmod: module is already loaded - pppox
Thu Sep 3 10:13:17 2020 daemon.err insmod: module is already loaded - pppoe
Thu Sep 3 10:13:21 2020 daemon.info pppd[1480]: Plugin rp-pppoe.so loaded.
Thu Sep 3 10:13:21 2020 daemon.info pppd[1480]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: pppd 2.4.7 started by root, uid 0
Thu Sep 3 10:13:21 2020 daemon.info pppd[1480]: PPP session is 11785
Thu Sep 3 10:13:21 2020 daemon.warn pppd[1480]: Connected to xx:xx:xx:xx:xx:xx via interface eth0.2
Thu Sep 3 10:13:21 2020 kern.info kernel: [ 41.033832] pppoe-wan: renamed from ppp0
Thu Sep 3 10:13:21 2020 daemon.info pppd[1480]: Using interface pppoe-wan
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: Connect: pppoe-wan <--> eth0.2
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: CHAP authentication succeeded
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: peer from calling number xx:xx:xx:xx:xx:xx authorized
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: local IP address 45.x.x.x
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: remote IP address 20.x.x.x
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: primary DNS address 45.x.x.x
Thu Sep 3 10:13:21 2020 daemon.notice pppd[1480]: secondary DNS address 45.x.x.x
Thu Sep 3 10:13:22 2020 daemon.notice netifd: Network device 'pppoe-wan' link is up
Thu Sep 3 10:13:22 2020 daemon.notice netifd: Interface 'wan' is now up
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: reading /tmp/resolv.conf.auto
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain test
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain onion
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain localhost
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain local
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain invalid
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain bind
Thu Sep 3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain lan
Thu Sep 3 10:13:23 2020 daemon.warn dnsmasq[1120]: ignoring nameserver 192.168.2.1 - local interface
Thu Sep 3 10:13:23 2020 daemon.info dnsmasq[1120]: using nameserver 45.x.x.x#53
Thu Sep 3 10:13:23 2020 daemon.info dnsmasq[1120]: using nameserver 45.x.x.x#53
Thu Sep 3 10:13:23 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Sep 3 10:13:59 2020 daemon.info dnsmasq[1120]: exiting on receipt of SIGTERM
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: started, version 2.80 cachesize 150
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: DNS service limited to local subnets
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq-dhcp[1710]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain test
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain onion
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain localhost
Thu Sep 3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain local
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain invalid
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain bind
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain lan
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: reading /tmp/resolv.conf.auto
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain test
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain onion
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain localhost
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain local
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain invalid
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain bind
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain lan
Thu Sep 3 10:14:04 2020 daemon.warn dnsmasq[1710]: ignoring nameserver 192.168.2.1 - local interface
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using nameserver 45.x.x.x#53
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: using nameserver 45.x.x.x#53
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: read /etc/hosts - 5 addresses
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq[1710]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Sep 3 10:14:04 2020 daemon.info dnsmasq-dhcp[1710]: read /etc/ethers - 0 addresses
Thu Sep 3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:19 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Thu Sep 3 10:14:19 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:22 2020 daemon.info procd: - init complete -
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:27 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:31 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Sep 3 10:14:31 2020 daemon.notice hostapd: rfkill: Cannot open RFKILL control device
Thu Sep 3 10:14:31 2020 kern.info kernel: [ 82.534902] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Sep 3 10:14:31 2020 kern.info kernel: [ 82.632260] br-lan: port 2(wlan0) entered blocking state
Thu Sep 3 10:14:31 2020 kern.info kernel: [ 82.637690] br-lan: port 2(wlan0) entered disabled state
Thu Sep 3 10:14:31 2020 kern.info kernel: [ 82.643549] device wlan0 entered promiscuous mode
Thu Sep 3 10:14:31 2020 daemon.err hostapd: Using interface wlan0 with hwaddr xx:xx:xx:xx:xx:xx and ssid "Gargoyle"
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep 3 10:14:33 2020 kern.info kernel: [ 83.787056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Sep 3 10:14:33 2020 kern.info kernel: [ 83.793657] br-lan: port 2(wlan0) entered blocking state
Thu Sep 3 10:14:33 2020 kern.info kernel: [ 83.799078] br-lan: port 2(wlan0) entered forwarding state
Thu Sep 3 10:14:33 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Thu Sep 3 10:14:33 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Thu Sep 3 10:14:33 2020 daemon.notice netifd: Network device 'wlan0' link is up
Yeah, I know. But the router options here in my country are terrible, old models and practically two brands only.
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)