TP-link WDR3600 Revert to Stock (tp-link) firmware

[yousaf465]

Can I use this file to revert to Stock wdr3600v1_en_3_13_31_up(130320).bin http://www.tplink.com/resources/softwar ... 130320.zip downloaded from http://www.tplink.com/en/support/downlo ... version=V1

[danymarc]

In theory yes but as it's downloaded from TL web you have to be sure it has no boot, check if your file is in this server all of them are stripped and contain no boot ftp://tplink-forum.pl/orgin_bez_boot/

[yousaf465]

In theory yes but as it's downloaded from TL web you have to be sure it has no boot, check if your file is in this server all of them are stripped and contain no boot ftp://tplink-forum.pl/orgin_bez_boot/

thanks

TPlink files with boot do have boot in their name e.g the 2 latest firmware do have boot

"wdr3600v1_en_3_14_1_up_boot(140916).bin"

"wdr3600v1_en_3_13_34_up_boot(130909).bin"


but I think it is better to revert with a proper stripped files with no boot.

[peterpiper]

Looking to do this myself, but no links to modified/stripped (without loader) for Gargoyle file links now working.
Eventually found one, possibly meant for openwrt (I lost where source was found) which flashed fine from Gargoyle web interface, reverting to stock v3.14.3
I then reflashed with latest (same version) download from TPLink, just to be sure.

https://1drv.ms/u/s!AkhLbc8vwTylsEdwOH2 ... I?e=KkFalJ

Sadly, the WDR3600 MODEM doesn't seem to do VDSL, was hoping to to replace BT smart hub.