Best settings for gaming QoS+DSCP

[Knomax]

Ok upload your configuration...but i dont understand even if you mark as CS4....in which class it falls..there is no reason to mark with dscp if you dont use classify class to fall in.

[taz-kun]

dscp marks packages not classes

[Knomax]

I know that....explain to me etc this rule in which class it falls
because i think that is a "placebo" effect only...marking packets with no use at all..unless they fall in some classes.

Code: Select all

# ps4 ingress
iptables -t mangle -A qos_ingress -d 192.168.1.142 -p udp -j DSCP --set-dscp-class CS6

Etc this rule

Code: Select all

# tcp flags ingress
iptables -t mangle -A qos_ingress -p tcp -m length --length :64 -j DSCP --set-dscp-class CS6

You catch it by this..
QoS in gui, download:

Destination: 192.168.1.142, Transport Protocol: UDP/ Ps4
Maximum Packet Length: 64 bytes, Transport Protocol: TCP /Fast

I was evolved in this project..
https://github.com/dlakelan/routerperf
A script specific for gamers...so i dont understand these dscp marks how they work.
You have rule for icmp..ok if you create in gui a rule with icmp will fall there...thats it.
The others with dscp marks doesnt "fall" anywhere.
Please post your configuration..maybe i missing something.

[taz-kun]

Code: Select all

iptables -t mangle -I PREROUTING -p udp -j DSCP --set-dscp-class CS4

Code: Select all

iptables -t mangle -I POSTROUTING -p udp -j DSCP --set-dscp-class CS4

Sorry I tried everything and never had stability in games, sometimes they were (HIT REG) perfect sometimes 70% 80% I returned my factory router to (Edgerouter)

Code: Select all

iptables -t mangle -I INPUT -p icmp -i pppoe-wan -j ACCEPT

Ó

Code: Select all

iptables -t mangle -I INPUT -p icmp -o pppoe-wan -j ACCEPT

https://ibb.co/YRH0pvd
https://ibb.co/ygZCbCt
If you want you can try this way even with the game service, I did not feel any difference, put the ports that your game uses

this was what helped a little

[taz-kun]

Hi, can I increase the kbps so that the MINRTT runs when it reaches 100 Kbps?

[Lantis]

Classes are considered active above 4kbps in that class.
The active monitoring occurs above 12-15% of the upper link limit.

If you want to change these behaviours, you'll need to modify the source code.

[-taz-]

HI,So far this setup has been perfect. For me


UPnP & NAT-PMP: On
Find your best DNS.






Example of what a game would look like using (80) (443)

[-taz-]

I have an error when activating congestion, megabytes are lowered, solution?

[Lantis]

Can you ask the question again with more detail and context please?
Less is not always more.

[-taz-]

As you can see in the picture, the congestion is active as the hours go by (link limit) it goes down to 3000Kbps or less, I don't know why this failure is due

DOES NOT happen I always notice when videos get stuck