Hi,
I have TL-WR1043ND with Gargoyle installed on it.
I need to go to stock firmware, but when I try to update the router with the stock firmware it says "Firmware contains a bootloader. Your router can not be upgraded".
I tried pretty much everything on the internet. Thanks
[TL-WR1043ND V3] How do I go back to stock?
Moderator: Moderators
Re: [TL-WR1043ND V3] How do I go back to stock?
Did you follow the wiki for your device which covers this scenario?
https://openwrt.org/toh/tp-link/tl-wr10 ... l_firmware
https://openwrt.org/toh/tp-link/tl-wr10 ... l_firmware
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: [TL-WR1043ND V3] How do I go back to stock?
It depends on your hardware version (V1.x, V2.x, ...). You must have "stripped firmware": https://wiki.openwrt.org/toh/tp-link/tl ... l_firmware or https://www.friedzombie.com/tplink-stripped-firmware/
V1: https://www.friedzombie.com/tplink-stri ... R1043ND-V1
V2: https://www.friedzombie.com/tplink-stri ... R1043ND-V2
V3: http://www.xup.in/dl,79323997/wr1043nd_v3_stripped.zip/
V1: https://www.friedzombie.com/tplink-stri ... R1043ND-V1
V2: https://www.friedzombie.com/tplink-stri ... R1043ND-V2
V3: http://www.xup.in/dl,79323997/wr1043nd_v3_stripped.zip/
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: [TL-WR1043ND V3] How do I go back to stock?
Many, many thanks! I could not find the V3 stripped version on the web!RomanHK wrote: wr1043nd_v3_stripped
I am back to stock firmware now.
Re: [TL-WR1043ND V3] How do I go back to stock?
Where can I find the v2 version?