Fibre connections VLAN

[ispyisail]

Hi all

In New Zealand and I suspect the rest of the world Fibre is becoming the norm. It appears that you can now use your own router (Gargoyle)to connect to the Fibre ONT. The problem is my provider requires a VLAN of 10.



It would be really good if we could have a VLAN input box

[ispyisail]

This is my exact same problem

https://forum.openwrt.org/t/vlan-on-wnd ... ort/153836

Im working through a command line solution

[ispyisail]

[ispyisail]

Code: Select all

uci set network.wan.device='eth0.10'

[ispyisail]

Code: Select all

uci set network.wan.device='eth0.10'
uci set network.wan6.device='@wan'
uci commit network

/etc/config/network

Before

Code: Select all

config interface 'loopback'
	option device 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fd85:346e:3122::/48'

config device
	option name 'br-lan'
	option type 'bridge'
	list ports 'eth1.1'

config interface 'lan'
	option device 'br-lan'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option ip6assign '60'

config interface 'wan'
	option device 'eth0.2'
	option proto 'dhcp'

config interface 'wan6'
	option device '@wan'
	option proto 'dhcpv6'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option ports '2 3 4 5 0t'

config switch_vlan
	option device 'switch0'
	option vlan '2'
	option ports '1 6t'

After

Code: Select all

config interface 'loopback'
	option device 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fd85:346e:3122::/48'

config device
	option name 'br-lan'
	option type 'bridge'
	list ports 'eth1.1'

config interface 'lan'
	option device 'br-lan'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option ip6assign '60'

config interface 'wan'
	option device 'eth0.2'
	option proto 'dhcp'

config interface 'wan6'
	option device 'eth0.10'
	option proto 'dhcpv6'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option ports '2 3 4 5 0t'

config switch_vlan
	option device 'switch0'
	option vlan '2'
	option ports '1 6t'

[Lantis]

I'll work on this, but i can't test it, i will need testers.
The only complication is making it work for both DSA and older style switch setups at the same time, AND, making sure that Gargoyle doesn't blow it away when resetting anything.

[ispyisail]

I'll work on this, but i can't test it, i will need testers.
The only complication is making it work for both DSA and older style switch setups at the same time, AND, making sure that Gargoyle doesn't blow it away when resetting anything.

Thank you

I'm watching YouTube videos on how to VLAN untag to use the ISP-provided router for phones only.

I am not the only person to ask this question

https://www.geekzone.co.nz/forums.asp?f ... cid=250644

[ispyisail]

both DSA and older style switch setups

https://youtu.be/d3aYMqt-b_c

[ispyisail]

I'll work on this, but i can't test it, i will need testers.
The only complication is making it work for both DSA and older style switch setups at the same time, AND, making sure that Gargoyle doesn't blow it away when resetting anything.

The more I read the more I understand your post

How is any regular person going to use OpenWRT VLANS?

[ispyisail]

uci set network.wan.device='eth0.10'
uci set network.wan6.device='@wan'
uci commit network

I did some tests and the above commands failed

I wonder if it's a DSA issue (new format)?

The ISP's allow third-party routers and my unifi USG just works out of the box.