Ubnt RS Pro upgrade 1.14.0

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
ispyisail
Moderator
Posts: 5194
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Ubnt RS Pro upgrade 1.14.0

Post by ispyisail »

Hi all

I'm slowly upgrading my routers to 1.14.0

My Ubnt RS Pro upgrade to 1.14.0 fails to upgrade (via GUI)

I haven't checked the logs or tried OpenWRT yet

Just reporting, no action is required

ispyisail
Moderator
Posts: 5194
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Ubnt RS Pro upgrade 1.14.0

Post by ispyisail »

Code: Select all

root@Gargoyle:/tmp# sysupgrade openwrt-23.05.2-ath79-generic-ubnt_routerstation-pro-squashfs-sysupgrade.bin
Device routerstation-pro not supported by this image
Supported devices: ubnt,routerstation-pro - Image version mismatch: image 2.0, device 1.0. Please wipe config during upgrade (force required) or reinstall. Reason: Partition design has changed compared to older versions (19.07 and 21.02) due to kernel drivers restrictions. Upgrade via sysupgrade mechanism is one way operation. Downgrading OpenWrt version will involve usage of TFTP recovery or bootloader command line interface.
Image check 'fwtool_check_image' failed.

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Ubnt RS Pro upgrade 1.14.0

Post by Lantis »

What version are you coming from?
In 1.13.x (very late in the series?) I added support for showing these failure messsges on the GUI
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ispyisail
Moderator
Posts: 5194
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Ubnt RS Pro upgrade 1.14.0

Post by ispyisail »

1.11

I've just about got it flashed with TFTP but what a mission

ispyisail
Moderator
Posts: 5194
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Ubnt RS Pro upgrade 1.14.0

Post by ispyisail »

I got it in the end but I had so many problems

I tried so many things I'm not even sure the correct procedure

Image

Post Reply