====== TP-1043ND Qss button on/off wifi ====== I use below code in TP-WR1043ND and Gargoyle 1.5.10, it works. /etc/config/system config 'button' 'wifionoff' option 'button' 'wps' option 'action' 'released' option 'handler' '/sbin/wifionoff' option 'min' '0' option 'max' '2' config 'led' 'led_onoff' option 'sysfs' 'tp-link:green:qss' option 'trigger' 'timer' option 'mode' 'link' option 'default' '1' option 'delayon' '2000' option 'delayoff' '3000' /sbin/wifionoff #!/bin/sh SW=`ifconfig wlan0 | wc -l` if [ "$SW" == "7" ] ; then echo 0 > /sys/class/leds/tp-link\:green\:qss/brightness else echo 1 > /sys/class/leds/tp-link\:green\:qss/brightness echo timer > /sys/class/leds/tp-link\:green\:qss/trigger echo 3000 > /sys/class/leds/tp-link\:green\:qss/delay_off echo 2000 > /sys/class/leds/tp-link\:green\:qss/delay_on fi if [ "$SW" == "7" ] ; then wifi down; fi if [ "$SW" == "0" ] ; then wifi up; fi chmod + x /sbin/wifionoff When wifi in on : qss led blink "slowly"