I tried to update from 1.10 to 1.12 with gargoyle_1.12.0-ar71xx-generic-archer-c7-v2-squashfs-sysupgrade.bin under "update firmware" admin panel.
When i clicked 'upgrade now' i received a blank javascript alert, i think i clicked yes. I don't remember have seen any special lights activity, but at some I disconnected the psu by mistake.
Now that i turn it on, its rebooting a a predictable ~12 seconds. Is there anything to do?
Archer C7 v2 rebooting every 12 seconds
Moderator: Moderators
Re: Archer C7 v2 rebooting every 12 seconds
serial cable
You can then see what's going on.
or a new router for you.
You can then see what's going on.
or a new router for you.
Re: Archer C7 v2 rebooting every 12 seconds
As in https://www.aliexpress.com/wholesale?ca ... rial+Cable ?
Following a guide like https://openwrt.org/toh/tp-link/tl-wr10 ... al_console ?
How am i going to manage the rebooting aspect?
Following a guide like https://openwrt.org/toh/tp-link/tl-wr10 ... al_console ?
How am i going to manage the rebooting aspect?
Re: Archer C7 v2 rebooting every 12 seconds
TP-Link Archer C7 v2 - Gargoyle 1.12.X
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
Re: Archer C7 v2 rebooting every 12 seconds
It just reboots about 12 seconds in. Connected only to the PSU.
https://youtu.be/0AXQpMjA7tM
https://youtu.be/0AXQpMjA7tM
Re: Archer C7 v2 rebooting every 12 seconds
Yes, only a serial cable will help here.cpucpu wrote: ↑Mon Feb 15, 2021 11:26 pmIt just reboots about 12 seconds in. Connected only to the PSU.
https://youtu.be/0AXQpMjA7tM
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: Archer C7 v2 rebooting every 12 seconds
Ok, I'll get one, it'll take a couple of weeks to arrive. But then, what will i do with it? Flashing / Recovery using the serial console?
How i am going to work my way out if its rebooting every 12 seconds.
How i am going to work my way out if its rebooting every 12 seconds.
Re: Archer C7 v2 rebooting every 12 seconds
Have a look at the openwrt wiki
all the instructions are there
all the instructions are there
Re: Archer C7 v2 rebooting every 12 seconds
The usb-ttl just arrived, oddly enough, i recovered it through TFTP using this guide.
Now that i think, i never got to use the native firmware. Probably will continue with gargoyle due to familiarity
Now that i think, i never got to use the native firmware. Probably will continue with gargoyle due to familiarity